Sharp GHC Series Heavy Duty Lathes

·ONE-PIECE BASE CASTING

Information

	A massive, wide bed, big bore engine lathe.  The full length, one piece base casting gives this machine incredible rigidity.  The rapid transverse makes operation effortless.  Bedways are hardened and ground Meehanite® for wear resistance.  The quick change gearbox achieves all inch and metric threads without interchanging gears.  The headstock is fitted with chrome-moly hardened and ground gears and is pressure lubricated.  Bedways and carriage are automatically lubricated and the crossfeed leadscrew operates in an oil bath to prevent wear and to maintain accuracy.

Standard Equipment

·2 Speed Tailstock
·Rapid Traverse
·10" 3 Jaw Chuck
·20" 4 Jaw Chuck
·Steady Rest
·Safety Brake
·Coolant System
·Multi-Position Length Stop
·Rear Splash Guard

Specifications

·Many combinations of swing diameter and bed length are available.
 Typical size combinations are shown below

MODEL                 GHC 2280   GHC 26100   GHC 26120   GHC 30157
===================================================================
Swing     -Over Bed   22"        26"         30"         30"
          -Over Gap   31"        35 1/2"     40"         40"
          -Over slide 13"        17 1/2"     22"         22"

Bed       -Width      15 3/4"    15 3/4"     15 3/4"     15 3/4"
          -Length C-C 78"        92"         118"        157"

Spindle   -Speeds     12, 13 to 1200 RPM     -------->   -------->
          -Bore       4 1/8"     4 1/8"      4 1/8"      4 1/8"
          -Nose       Camlock -D1-11         -------->   -------->
          -H.P.       15         15          15          15

Threads   -Inch       44: 1-36 or 2-72 TPI   -------->   -------->
          -Metric     39: 28-.4 or 14-.2 mm  -------->   -------->

Tailstock -Taper      5          5           5           5
          -Travel     7"         7"          7"          7"

Net Weight            7,700 lbs. 8,800 lbs.  10,000 lbs. 12,100 lbs.